July 30/18 – Moster classic pull start upgrade

This upgrade kit relocates the pull start handle to the vertical top cage tube and makes starting on the back and in flight much easier.

Cost $ 100

Instructions:

Undo this bolt

Remove pull start – 4 x 6 mm machine bolt

Make sure the rope is at least 2.1 m long – if not replace with one provided

Bolt rotational plate to the pull start exactly like this using 4 machine mushroom cap head bolts and lock nuts. Please pay attention to the cut outs on the plate to orient the pull start properly on the rotational plate

Bolt the pull start back on the engine with rope exit hole straight up

You will have to use black haxgonal head machine bolt for this hole

Use lock washers and medium (blue) locktite

Bolt on hook for pulley

Hook the pulley on

Enjoy