Matt, Ash and Steve atarted PPG course this Sunday. First day ground school and motor work. Second day kiting with trainers am and with real gliders pm
Day 3 and 4 – complete write off – wind gusting over 50 km/h both days.
Finally good day at the field. It was windy all week.
Ben and Andy finished.
Congrats!
Geoff was booked to fly tonight but got some bad weather
If you buy a paramotor from me it does not mean that the whole thing came from RS ULTRA already assembled.
This is how it works:
I purchase Vittorazi 2 stroke motor directly from Vittorazi in Italy.
I purchase propeller from very reputable North America based manufacturer
I purchase frame, cage, harness, gas tank, paraglider attachment system, engine adapter, hand throttle from RS ULTRA
I am the one who assembles the unit.
Any questions regarding frame, cage, harness, gas tank, paraglider attachment system, engine adapter, hand throttle should be directed to me and not to RS ULTRA. I will contact RS ULTRA if need be.
Any questions regarding the 2 stroke motor in your paramotor should be directed to me and not to RS ULTRA or Vittorazi. I will contact Vittorazi if need be.
Any questions regarding the propeller in your paramotor should be directed to me and not to RS ULTRA or Vittorazi.
Any questions regarding the location and function of the on frame pull start pulley in your paramotor should be directed to me and not to RS ULTRA or Vittorazi.
Any questions regarding the assembly your paramotor should be directed to me and not to RS ULTRA or Vittorazi.
This upgrade kit relocates the pull start handle to the vertical top cage tube and makes starting on the back and in flight much easier.
Cost $ 100
Instructions:
Undo this bolt
Remove pull start – 4 x 6 mm machine bolt
Make sure the rope is at least 2.1 m long – if not replace with one provided
Bolt rotational plate to the pull start exactly like this using 4 machine mushroom cap head bolts and lock nuts. Please pay attention to the cut outs on the plate to orient the pull start properly on the rotational plate
Bolt the pull start back on the engine with rope exit hole straight up
You will have to use black haxgonal head machine bolt for this hole
Use lock washers and medium (blue) locktite
Bolt on hook for pulley
Hook the pulley on
Enjoy
Former student Ben took his selfie stick up…
Gear RS ULTRA paramotor with Moster Classic engine and Cima PWR by Sky Paragliders
So much fun!
I got 50 hrs so I had to change the crankcase oil. It was relatively eaay and all went well. This engine is just biy more complicated then our air cooled PPG two strokes…
